Porting audio from any bnsf file to s4 characters
Dec 18, 2016 16:19:37 GMT
Zealot Tormunds likes this
Post by FlameFlash on Dec 18, 2016 16:19:37 GMT
First Of All
You need to get .bnsf File or extract it from a character _pl of s4 to hear the sound u can convert it to .wav in this method here
Past that .bnsf info in your past it at the end before the 00 00 00 08
NOTE!! if your file doesn't end with half line of BYTES add 8 of 00s
the linking is the good old reverse linking but there is one difference the value doesn't start from where u gonna link it it is going to start from the first "BNSF" in the _pl file
after pasting u will need to expand the "BNSF" section size you expand it next to the "PACK" with the reversed size before the First "BNSF"
U will be linking to normal sound codes that will be using bare in mind that i don't think you can extract them but there is much that u can do
and the codes self explain them selves but a bit different from normal moveset codes (an example ckratk_L_vX[l=letter,x=number) for jutsus)
there is some codes that are like S_PL_ATK_cmn_vS_rv with out the number after the "v" this is kinda like the master one for them
here where you will be linking your sound to :-
after the 08 00 00 00 is the reversed which starts from the "BNSF" as i said above after the reverse link the 2 bytes indicate how long the sound lasts (that also means if it is too short than the sound the sound will be cut)
after that few bytes for audio stuff etc they are important esp when it comes to default sound like shuriken/stances sound(dart,nja)
after doing all of this u expand it here
and then you are done
Past that .bnsf info in your past it at the end before the 00 00 00 08
NOTE!! if your file doesn't end with half line of BYTES add 8 of 00s
the linking is the good old reverse linking but there is one difference the value doesn't start from where u gonna link it it is going to start from the first "BNSF" in the _pl file
after pasting u will need to expand the "BNSF" section size you expand it next to the "PACK" with the reversed size before the First "BNSF"
U will be linking to normal sound codes that will be using bare in mind that i don't think you can extract them but there is much that u can do
and the codes self explain them selves but a bit different from normal moveset codes (an example ckratk_L_vX[l=letter,x=number) for jutsus)
there is some codes that are like S_PL_ATK_cmn_vS_rv with out the number after the "v" this is kinda like the master one for them
here where you will be linking your sound to :-
after the 08 00 00 00 is the reversed which starts from the "BNSF" as i said above after the reverse link the 2 bytes indicate how long the sound lasts (that also means if it is too short than the sound the sound will be cut)
after that few bytes for audio stuff etc they are important esp when it comes to default sound like shuriken/stances sound(dart,nja)
after doing all of this u expand it here
and then you are done